2. If the Ink Cartridges are not suitable for priming, the following message will appear on the front panel.
Replace the installed Ink Cartridges with Ink Cartridges that are new or contain less than 88% of ink.
Press any key to exit.
3. When the following message appears on the front panel, press OK to continue or Cancel to exit.
4. The front panel displays the following message, then restarts the purge process.
5. When the printer has restarted, the front panel asks you to open the Window and remove all the
Printheads.
6. When you have removed all the Printheads, the front panel asks you to install the Setup Printheads.
7. When you have installed the Setup Printheads, the front panel displays the following message.
8. When you have closed the Printhead Cover and the Windows, the printer begins to purge the tubes.
9. When the tubes have been purged, the front panel asks you to open the Window.
102 Chapter 5 Service tests and utilities ENWW
To Next Page
Loading...