31. Carefully slide the Ink Cartridge Tube Connector off the Ink Supply Station.
32. Remove the Ink Supply Tubes and Trailing Cable from the printer.
Installation of the Ink Supply Tubes and Trailing Cable
NOTE: After installing the new Ink Supply Tubes and Trailing Cable, make sure you perform the following
Service Utility:
●
Reset life counter scan cycles tubes/cable
Reset Life Counters on page 103.
ISS to Cartridge Cables
Removal
WARNING! Switch off the printer and remove the power cable.
1. Remove the Left Cover See Cover, Left on page 215.
ENWW Disassembly order 295
To Next Page
Loading...