6. Disconnect the cable from the Right Printer Interlock.
NOTE: Only the Right Printer Interlock contains a sensor and cable. When reinstalling the Printer
Interlocks, make sure they are installed in the same position as when they were removed.
Paper Infeed Platen
Removal
1. Remove the Printer Interlocks
Printer Interlocks on page 426.
2. Remove three screws that secure the right side of the Paper Infeed Platen.
3. Remove three screws that secure the left side of the Paper Infeed Platen.
428 Chapter 10 Stacker part removal and installation ENWW
To Next Page
Loading...