SE 28.1:01
Cause: The Yellow Printhead in slot 1 is deteriorating
Solution: This may impact your print quality. If it becomes unacceptable in the future, replace that printhead
with a new one.
NOTE: This system error appears only after the printhead is out of warranty.
SE 28.2:01
Cause: The Yellow Printhead in slot 2 is deteriorating
Solution: This may impact your print quality. If it becomes unacceptable in the future, replace that printhead
with a new one.
NOTE: This system error appears only after the printhead is out of warranty.
SE 28.3:01
Cause: The Magenta/Cyan Printhead in slot 3 is deteriorating
Solution: This may impact your print quality. If it becomes unacceptable in the future, replace that printhead
with a new one.
NOTE: This system error appears only after the printhead is out of warranty.
SE 28.4:01
Cause: The Magenta/Cyan Printhead in slot 4 is deteriorating
Solution: This may impact your print quality. If it becomes unacceptable in the future, replace that printhead
with a new one.
NOTE: This system error appears only after the printhead is out of warranty.
SE 28.5:01
Cause: The Matte Black Printhead in slot 5 is deteriorating.
Solution: This may impact your print quality. If it becomes unacceptable in the future, replace that printhead
with a new one.
NOTE: This system error appears only after the printhead is out of warranty.
SE 28.6:01
Cause: The Matte Black Printhead in slot 6 is deteriorating
Solution: This may impact your print quality. If it becomes unacceptable in the future, replace that printhead
with a new one.
NOTE: This system error appears only after the printhead is out of warranty.
SE 28.7:01
Cause: The Gray/Dark Gray Printhead in slot 7 is deteriorating
ENWW Continuable and non-continuable error codes 49
To Next Page
Loading...