●
Remove the Ink Cartridge and reinstall it into the printer.
●
Replace the Ink Cartridge.
●
Check that the ISS to Cartridge cable is not damaged and is correctly connected to the Ink Supply Tubes
PCA.
●
Replace the ISS to Cartridge cable
ISS to Cartridge Cables on page 295.
SE 26.2:01
Cause: Bad contact detected in ISS slot 2 floater
Solution: Try the following operations on the Matte Black Cartridge.
●
Remove the Ink Cartridge and reinstall it into the printer.
●
Replace the Ink Cartridge.
●
Check that the ISS to Cartridge cable is not damaged and is correctly connected to the Ink Supply Tubes
PCA.
●
Replace the ISS to Cartridge cable
ISS to Cartridge Cables on page 295.
SE 26.3:01
Cause: Bad contact detected in ISS slot 3 floater
Solution: Try the following operations on the Dark Gray Cartridge.
●
Remove the Ink Cartridge and reinstall it into the printer.
●
Replace the Ink Cartridge.
●
Check that the ISS to Cartridge cable is not damaged and is correctly connected to the Ink Supply Tubes
PCA.
●
Replace the ISS to Cartridge cable
ISS to Cartridge Cables on page 295.
SE 26.4:01
Cause: Bad contact detected in ISS slot 4 floater
Solution: Try the following operations on the Magenta Cartridge.
●
Remove the Ink Cartridge and reinstall it into the printer.
●
Replace the Ink Cartridge.
●
Check that the ISS to Cartridge cable is not damaged and is correctly connected to the Ink Supply Tubes
PCA.
●
Replace the ISS to Cartridge cable
ISS to Cartridge Cables on page 295.
SE 26.5:01
Cause: Bad contact detected in ISS slot 5 floater
Solution: Try the following operations on the Gray Cartridge.
●
Remove the Ink Cartridge and reinstall it into the printer.
●
Replace the Ink Cartridge.
ENWW Continuable and non-continuable error codes 47
To Next Page
Loading...