Solution: This may impact your print quality. If it becomes unacceptable in the future, replace that printhead
with a new one.
NOTE: This system error appears only after the printhead is out of warranty.
SE 28.8:01
Cause: The Gray/Dark Gray Printhead in slot 8 is deteriorating
Solution: This may impact your print quality. If it becomes unacceptable in the future, replace that printhead
with a new one.
NOTE: This system error appears only after the printhead is out of warranty.
SE 28.1:02
Cause: The Yellow Printhead in slot 1 is nearing the end of its useful life
Solution: This printhead may have reached a degradation level that prevents the printer from producing
acceptable prints consistently. If it becomes unacceptable in the future, run the Clean (Recover) Printhead
procedure.
NOTE: This system error appears only after the printhead is out of warranty.
SE 28.2:02
Cause: The Yellow Printhead in slot 2 is nearing the end of its useful life
Solution: This printhead may have reached a degradation level that prevents the printer from producing
acceptable prints consistently. If it becomes unacceptable in the future, run the Clean (Recover) Printhead
procedure.
NOTE: This system error appears only after the printhead is out of warranty.
SE 28.3:02
Cause: The Magenta/Cyan Printhead in slot 3 is nearing the end of its useful life
Solution: This printhead may have reached a degradation level that prevents the printer from producing
acceptable prints consistently. If it becomes unacceptable in the future, run the Clean (Recover) Printhead
procedure.
NOTE: This system error appears only after the printhead is out of warranty.
SE 28.4:02
Cause: The Magenta/Cyan Printhead in slot 4 is nearing the end of its useful life
Solution: This printhead may have reached a degradation level that prevents the printer from producing
acceptable prints consistently. If it becomes unacceptable in the future, run the Clean (Recover) Printhead
procedure.
NOTE: This system error appears only after the printhead is out of warranty.
SE 28.5:02
Cause: The Matte Black Printhead in slot 5 is nearing the end of its useful life
50 Chapter 3 System error codes ENWW
To Next Page
Loading...