8. When the printer is ready, the front panel prompts you to use the Up/Down keys to move the carriage
until the right-hand edge of the left alignment mark on the Carriage Cover is correctly aligned with the
Primer Positioning Indicator. When the carriage is correctly aligned, press OK.
TIP: To see the exact position while aligning the Carriage to the Primer, it is a good idea to press down
lightly on the Primer while you are moving the Carriage.
While the Carriage is moving, the front panel shows the actual position and the direction of movement
and prompts you to press OK when done.
ENWW Entering the Service Calibrations menu 127
To Next Page
Loading...