Huawei Quidway S3900 Series - Page 101

Operation Manual – Configuration File Management
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 Configuration File Management
Huawei Technologies Proprietary
1-2
Table 1-1 Configure a configuration file
Operation Command Description
Save the current
configuration to a
specified
configuration file
and specify the
configuration file to
be the
primary/secondary
configuration file
save [ cfgfile | [safely ]
[ backup | main ] ]
Optional
The save command can be
executed in any view.
Remove a specific
configuration file
from the Flash
reset saved-configuration
[ backup | main ]
Optional
Specify the name
and attribute of the
configuration file to
be used in the next
startup
startup
saved-configuration cfgfile
[ backup | main ]
Optional
By default, the switch uses
the main configuration file in
the next startup.
Specify that the
switch starts
without loading the
configuration file
undo startup
saved-configuration [ unit
unit-id ]
Optional
Display the primary
configuration file
display
saved-configuration [ unit
unit-id ] [ by-linenum ]
Display the current
configuration
display
current-configuration
[ configuration
[ configuration-type ] |
interface [ interface-type ]
[ interface-number ] | vlan
[ vlan-id ] ] [ by-linenum [ |
{ begin | include | exclude }
regular-expression ]
Display the
configuration
performed in the
current view
display this [ by-linenum ]
Display the
information about
the configuration
file to be used for
startup.
display startup [ unit
unit-id ]
Optional
These commands can be
executed in any view.