Huawei Quidway S3900 Series User Manual

Operation Manual – Port Security & Port Binding
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 2 Port Binding Configuration
Huawei Technologies Proprietary
2-1
Chapter 2 Port Binding Configuration
2.1 Introduction to Port Binding
2.1.1 Port Binding Overview
The network manager may bind the MAC addresses and IP addresses of legal user to
specific port through the port binding feature. After binding, only the packets with the
specified MAC addresses and IP addresses can be transferred through the port. This
greatly improves the security and manageability of the system.
2.1.2 Configuring Port Binding
Table 2-1 Configure port binding
Operation Command Description
Enter system view
system-view
-
Bind the legal MAC
addresses and IP
addresses to
specific port
am user-bind mac-addr mac-address
ip-addr ip-address interface
interface-type interface-number
Optional
Enter Ethernet port
view
interface interface-type
interface-number
-
Bind the legal MAC
addresses and IP
addresses to
current port
am user-bind mac-addr mac-address
ip-addr ip-address
Optional
 Note:
The system allows only one binding operation for the same MAC address.
2.2 Displaying Port Binding Configuration
After the above-mentioned configuration, you can use the display command in any
view to view the operating state with the port binding configured, so as to verify
configuration result.

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English