Huawei Quidway S3900 Series User Manual

Operation Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 4 OSPF Configuration
Huawei Technologies Proprietary
4-16
4.6 OSPF Route Control
Perform the following configurations to control the advertisement and reception of the
routing information discovered by OSPF and import routing information discovered by
other protocols.
4.6.1 Configuration Prerequisites
Before configuring OSPF route control, perform the following tasks:
z Configuring the network layer addresses of interfaces so that the adjacent nodes
are reachable to each other at the network layer
z Completing basic OSPF configuration
z Configuring filter list to filter routing information
4.6.2 Configuring OSPF Route Summary
The configuration of OSPF route summary includes:
z Configuring ABR route summary,
z Configuring ASBR route summary for imported routes.
Table 4-7 Configure ABR route summary
Operation Command Description
Enter system view
system-view
—
Enter OSPF view
ospf [ process-id
[ router-id router-id ] ]
Required
Enter area view
area area-id
Required
Enable ABR route summary
abr-summary
ip-address mask
[ advertise |
not-advertise ]
Required
This command takes
effect only when it is
configured on an ABR.
By default, this function
is disabled on an ABR.
Table 4-8 Configure ASBR route summary
Operation Command Description
Enter system view
system-view
—
Enter OSPF view
ospf [ process-id
[ router-id router-id ] ]
Required

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English