Operation Manual - QoS&QoS Profile
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 QoS Configuration
Huawei Technologies Proprietary
1-19
1.8.1 Configuration Prerequisites
z ACL rules used for traffic identifying are defined. Refer to the ACL module in the
book for defining ACL rules
z The limit rate for TP, the actions for the packets within the specified traffic and the
actions for the packets beyond the specified traffic have been specified.
z The ports that needs this configuration is specified
1.8.2 Configuration Procedure of TP
Table 1-12 Configure TP
Operation Command Description
Enter system view
system-view
—
Enter Ethernet port
view
interface
interface-type
interface-number
—
Configure
traffic-based TP
traffic-limit inbound
acl-rule target-rate
[ exceed action ]
Required
exceed exceed-action: Sets the
actions on the packets exceeding
the specified traffic when the
packet traffic exceeds the
specified traffic. The actions
include:
z drop: Drops the packets.
z remark-dscp dscp-value:
Resets the DSCP precedence
of the packets and forwards
them at the same time.
Display the parameter
configurations of
traffic policing
display
qos-interface
{ interface-type
interface-number |
unit-id } traffic-limit
Optional
You can execute the display
command in any view
To Next Page
Loading...
