Huawei Quidway S3900 Series User Manual

Operation Manual – Cluster
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 Cluste
r
Huawei Technologies Proprietary
1-14
1.3.3 Enabling NTDP Globally and for Specific Ports
Table 1-14 Enable NTDP globally and for specific ports
Operation Command Description
Enter system view
system-view
—
Enable system
NTDP
ntdp enable
Required
Enter Ethernet port
view
interface interface-type
interface-number
—
Enable NTDP for
the port
ntdp enable
Required
1.3.4 Configure Member Devices to Access FTP/TFTP Server of the Cluster
Perform the following configuration in user view of the member device.
Table 1-15 Configure member devices to access FTP/TFTP server of the cluster
Operation Command Description
Access the public
FTP server of the
cluster
ftp cluster
Optional
Download files
from the public
TFTP server of the
cluster
tftp cluster get source-file
[ destination-file ]
Optional
Upload files to the
public TFTP server
of the cluster
tftp cluster put source-file
[ destination-file ]
Optional
1.4 Intra-Cluster Configuration
Table 1-16 Configure a cluster
Operation Command Description
Enter system view
system-view
—
Enter cluster view
cluster
—
Add a candidate
device to a cluster
add-member
[ member-number ]
mac-address H-H-H
[ password password ]
Optional

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English