Huawei Quidway S3900 Series User Manual

Operation Manual - QoS&QoS Profile
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 2 QoS Profile Configuration
Huawei Technologies Proprietary
2-2
The following table describes the QoS profile configurations:
Table 2-1 Configure QoS profile
Device Configuration Configuration link
Configure user authentication
information
—
AAA
server
Configure the matching
relationship between the QoS
profile and the user name
One QoS profile can match with
more than one users
Enable the 802.1x authentication
function
Refer to 802.1x module in this
manual for the related
configuration procedure
Configure QoS profile 2.3 Configuring QoS Profile
Switch
Apply the QoS profile to a port
manually
2.4 Applying the QoS Profile to
the Port Manually
2.3 Configuring QoS Profile
Refer to 2.1 Introduction to QoS Profile for the introduction to QoS profile.
2.3.1 Configuration Prerequisites
z ACL rules used for traffic identifying are defined. Refer to the ACL module in this
book for defining ACL rules
z The global 802.1x authentication function is enabled and 802.1x authentication
function is enabled on the user access port
z The type and number of actions in the QoS profile is specified
z The application mode of the QoS profile on the port is specified
2.3.2 Configuration Procedure
Table 2-2 Configure QoS profile
Operation Command Description
Enter system view
system-view
—
Enter QoS profile view
qos-profile profile-name
—
Add TP actions
traffic-limit inbound
acl-rule target-rate
[ exceed action ]
Optional
Add packet filter
actions
packet-filter { inbound |
outbound } acl-rule
Optional

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English