Huawei Quidway S3900 Series - Cluster

Operation Manual – Cluster
Quidway S3900 Series Ethernet Switches-Release 1510 Table of Contents
Huawei Technologies Proprietary
i
Table of Contents
Chapter 1 Cluster........................................................................................................................... 1-1
1.1 Cluster Overview................................................................................................................ 1-1
1.1.1 Introduction to HGMP V2 ........................................................................................ 1-1
1.1.2 Introduction to NDP................................................................................................. 1-2
1.1.3 Introduction to NTDP............................................................................................... 1-3
1.1.4 Introduction to Cluster............................................................................................. 1-3
1.1.5 Switch Roles in the Cluster ..................................................................................... 1-4
1.2 Management Device Configuration ................................................................................... 1-7
1.2.1 Management Device Configuration Tasks.............................................................. 1-7
1.2.2 Enabling NDP Globally and for Specific Ports........................................................ 1-8
1.2.3 Configuring NDP-related Parameters ..................................................................... 1-8
1.2.4 Enabling NTDP Globally and for Specific Ports...................................................... 1-8
1.2.5 Configuring NTDP-related Parameters................................................................... 1-9
1.2.6 Enabling the Cluster Function................................................................................. 1-9
1.2.7 Configuring Cluster Parameters............................................................................ 1-10
1.2.8 Configuring Interaction for the Cluster .................................................................. 1-11
1.2.9 Configuring NM Interface for the Cluster ..............................................................1-11
1.3 Member Device Configuration ......................................................................................... 1-12
1.3.1 Member Device Configuration Tasks.................................................................... 1-12
1.3.2 Enabling NDP Globally and for Specific Ports...................................................... 1-13
1.3.3 Enabling NTDP Globally and for Specific Ports.................................................... 1-14
1.3.4 Configure Member Devices to Access FTP/TFTP Server of the Cluster.............. 1-14
1.4 Intra-Cluster Configuration............................................................................................... 1-14
1.5 Displaying and Maintaining a Cluster .............................................................................. 1-15
1.6 Cluster Configuration Example........................................................................................ 1-16
1.6.1 Basic Cluster Configuration Example.................................................................... 1-16
1.6.2 NM Interface Configuration Example.................................................................... 1-20