Huawei Quidway S3900 Series User Manual

Operation Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 AAA & RADIUS & HWTACACS
Configuration
Huawei Technologies Proprietary
1-24
Operation Command Description
Enable UDP port for AAA
RADIUS client
radius client enable
Optional
By default, UDP port for AAA
RADIUS client is enabled.
Caution:
A RADIUS scheme can be referenced by multiple ISP domains simultaneously.
1.4.2 Configuring RADIUS Authentication/Authorization Servers
Table 1-13 Configure RADIUS authentication/authorization server
Operation Command Description
Enter system view
system-view
—
Create a RADIUS scheme
and enter its view
radius scheme
radius-scheme-na
me
Required
By default, a RADIUS
scheme named "system" has
already been created in the
system.
Set the IP address and port
number of the primary
RADIUS
authentication/authorization
server
primary
authentication
ip-address
[ port-number ]
Required
By default, the IP address and
UDP port number of the
primary server are 0.0.0.0
and 1812 respectively.
Set the IP address and port
number of the secondary
RADIUS
authentication/authorization
server
secondary
authentication
ip-address
[ port-number ]
Optional
By default, the IP address and
UDP port number of the
secondary server are 0.0.0.0
and 1812 respectively.

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English