Huawei Quidway S3900 Series User Manual

Operation Manual – Information Center
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 Information Cente
r
Huawei Technologies Proprietary
1-13
Operation Command Description
Set the format of
time stamp
info-center timestamp { log | trap
| debugging } { boot | date |
none }
Optional
This is to set the time
stamp format for
log/debugging/trap
information output.
This determines how
the time stamp is
presented to users.
 Note:
To view debugging information of specific modules, you need to set the information
type as debug in the info-center source command, and enable debugging on
corresponding modules with the debugging command as well.
1.2.7 Enabling Information Output to the SNMP
Table 1-12 lists the related configurations on the switch.
Table 1-12 Enable information output to the SNMP
Operation Command Description
Enter system view
system-view
—
Enable the
information center
info-center enable
Optional
By default, the information
center is enabled.
Enable information
output to the
SNMP
info-center snmp channel
{ channel-number |
channel-name }
Required
By default, the switch outputs
trap information to SNMP
through channel 5.
Define an
information source
info-center source
{ modu-name | default }
channel { channel-number |
channel-name } [ { log | trap
| debug } { level severity |
state state } ]*
Required
Set the format of
time stamp
info-center timestamp
{ log | trap | debugging }
{ boot | date | none }
Optional
This is to set the time stamp
format for log/debugging/trap
information output.
This determines how the time
stamp is presented to users.

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English