Operation Manual – PoE & PoE Profile
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 2 PoE Profile Configuration
Huawei Technologies Proprietary
2-4
2.4 PoE profile Configuration Example
I. Network requirements
Ethernent1/0/1 through Ethernet1/0/10 of the S3928P-PWR-EI switch are used by
users of group A who have the following requirements:
z All ports in use can enable PoE function;
z Signal cables are used to supply power;
z The PoE priority for Ethernet1/0/1 through Ethernet1/0/5 is Critical, whereas The
PoE priority for Ethernet1/0/6 through Ethernet1/0/10 is High.
z The maximum power for Ethernet1/0/1 through Ethernet1/0/5 ports is 3000mW,
whereas the maximum power for Ethernet1/0/6 through Ethernet1/0/10 is
15,400mW.
Based on the above requirements, two PoE profiles are made for users of group A.
z Apply PoE profile1 for Ethernet1/0/1 through Ethernet 1/0/5;
z Apply PoE profile2 for Ethernet1/0/6 through Ethernet 1/0/10.
Network
S3928P-PWR
Ethernet 1/0/6 to Ethernet 1/0/10
Network
S3928P-PWR
AP
IP phone
IP phone
IP phone
IP phone
AP
AP
AP
Network
S3928P-PWR
Network
S3928P-PWR-EI
AP
IP phone
IP phone
IP phone
IP phone
AP
AP
AP
Network
S3928P-PWR
Network
S3928P-PWR
AP
IP phone
IP phone
IP phone
IP phone
AP
AP
AP
Network
S3928P-PWR
Ethernet 1/0/1 to Ethernet 1/0/5
Network
S3928P-PWR-EI
AP
IP phone
IP phone
IP phone
IP phone
AP
AP
AP
Network
S3928P-PWR
Ethernet 1/0/6 to Ethernet 1/0/10
Network
S3928P-PWR
AP
IP phone
IP phone
IP phone
IP phone
AP
AP
AP
Network
S3928P-PWR
Network
S3928P-PWR-EI
AP
IP phone
IP phone
IP phone
IP phone
AP
AP
AP
Network
S3928P-PWR
Network
S3928P-PWR
AP
IP phone
IP phone
IP phone
IP phone
AP
AP
AP
Network
S3928P-PWR
Ethernet 1/0/1 to Ethernet 1/0/5
Network
S3928P-PWR-EI
AP
IP phone
IP phone
IP phone
IP phone
AP
AP
AP
Figure 2-1 PoE profile application
II. Configuration procedure
# Create profile 1, and enter PoE profile view.
To Next Page
Loading...
Need help?
General