Huawei Quidway S3900 Series User Manual

Operation Manual – MAC Address Table
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1
MAC Address Table Management
Huawei Technologies Proprietary
1-4
z Configuring the maximum number of MAC addresses a port can learn
1.2.1 Configuring a MAC Address Entry
You can add, modify, or remove one MAC address entry, remove all MAC address
entries (unicast MAC addresses only) concerning a specific port, or remove specific
type of MAC address entries (dynamic or static MAC address entries).
You can add a MAC address entry in either system view or Ethernet port view.
I. Adding a MAC address entry in system view
Table 1-2 Add a MAC address entry in system view
Operation Command Description
Enter system view
system-view
—
Add a MAC address
entry
mac-address { static |
dynamic | blackhole }
mac-address interface
interface-type
interface-number vlan
vlan-id
Required
Caution:
When you add a MAC address entry, the port specified by the interface argument must
belong to the VLAN specified by the vlan argument in the command. Otherwise, the
entry will not be added.
II. Adding a MAC address entry in Ethernet port view
Table 1-3 Add a MAC address entry in Ethernet port view
Operation Command Description
Enter system view
system-view
—
Enter Ethernet port
view
interface interface-type
interface-number
—
Add a MAC address
entry
mac-address { static | dynamic
| blackhole } mac-address vlan
vlan-id
Required

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English