Huawei Quidway S3900 Series User Manual

Operation Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 AAA & RADIUS & HWTACACS
Configuration
Huawei Technologies Proprietary
1-20
Table 1-9 Configure dynamic VLAN assignment
Operation Command Description
Enter system
view
system-view
—
Create an ISP
domain and enter
its view
domain isp-name
—
Set the VLAN
assignment mode
vlan-assignment-mode
{ integer | string }
Optional
By default, the VLAN
assignment mode is integer.
Create a VLAN
and enter its view
vlan vlan_id
—
Set a VLAN name
for VLAN
assignment
name string
This operation is required if the
VLAN assignment mode is set to
string.
Caution:
z In string mode, if the VLAN ID assigned by the RADIUS server is a character string
containing only digits (for example, 1024), the switch first regards it as an integer
VLAN ID: the switch transforms the string to an integer value and judges if the value
is in the valid VLAN ID range; if it is, the switch adds the authenticated port to the
VLAN with the integer value as the VLAN ID (VLAN 1024, for example).
z To implement dynamic VLAN assignment on a port where both MSTP and 802.1x
are enabled, you must set the MSTP port to an edge port.
1.3.6 Configuring the Attributes of a Local User
When local scheme is chosen as the AAA scheme, you should create local users on
the switch and configure the relevant attributes.
The local users are users set on the switch, with each user uniquely identified by a user
name. To make a user who is requesting network service pass through the local
authentication, you should add an entry in the local user database on the switch for the
user.
Table 1-10 Configure the attributes of a local user
Operation Command Description
Enter system view
system-view
—

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English