Huawei Quidway S3900 Series User Manual

Operation Manual – Multicast Protocol
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 6 IGMP Configuration
Huawei Technologies Proprietary
6-6
Operation Description Related section
Configure router ports to
join the specified
multicast group
Optional
Section 6.2.4 Configuring Router
Ports to Join the Specified Multicast
Group
Configure IGMP Proxy Optional
Section
6.2.5 Configuring IGMP
Proxy
Remove the joined IGMP
groups from the interface
Optional
Section 6.2.6 Removing the Joined
IGMP Groups from the Interface
6.2.1 Configuring IGMP Version
Table 6-2 Configure IGMP version
Operation Command Description
Enter system view system-view
—
Enable the multicast
routing protocol
multicast
routing-enable
Enable the multicast
routing protocol
Enter VLAN interface
view
interface Vlan-interface
interface-number
—
Enable IGMP on the
current interface
igmp enable
Required
IGMP is disabled on the
interface by default.
Configure the IGMP
version of the Layer 3
switch (router)
igmp version { 1 | 2 }
Optional
IGMP version 2 is used by
default.
Caution:
Each IGMP version cannot be switched to each other automatically. So all the Layer 3
switches on a subnet must be configured to use the same IGMP version.
6.2.2 Configuring IGMP Query Packets
I. IGMP general query packets
The Layer 3 switch sends IGMP general query packets to the connected network
segment periodically to get to know which multicast groups in the network segment
have members according to the returned IGMP report packets. The multicast router

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English