EasyManuals Logo

Huawei Quidway S3900 Series User Manual

Huawei Quidway S3900 Series
955 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #797 background imageLoading...
Page #797 background image
Operation Manual -- NTP
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 NTP Configuration
Huawei Technologies Proprietary
1-2
Note:
z The accuracy of a clock is determined by its stratum, which ranges from 1 to 16. The
stratum of the reference clock ranges from 1 to 15. The accuracy descends with the
increasing of stratum number. The clocks with the stratum of 16 are in
unsynchronized state and cannot serve as reference clocks.
z The local clock of an S3900 series switch cannot operate as a reference clock. And
an S3900 series switch can serve as a time server only when it is synchronized.
1.1.2 Working Principle of NTP
The working principle of NTP is shown in Figure 1-1.
In
Figure 1-1, The Ethernet switch A (LS_A) is connected to the Ethernet switch B
(LS_B) through their Ethernet ports. Both of them have system clocks of their own, and
they need to synchronize the clocks of each other through NTP. For ease of
understanding, suppose that:
z Before the system clocks of LS_A and LS_B are synchronized, the clock of LS_A
is set to 10:00:00am, and the clock of LS_B is set to 11:00:00am.
z LS_B serves as the NTP time server, that is, the clock of LS_A will be
synchronized to that of LS_B.
z It takes one second for a packet sent by one switch to reach the other.

Table of Contents

Other manuals for Huawei Quidway S3900 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei Quidway S3900 Series and is the answer not in the manual?

Huawei Quidway S3900 Series Specifications

General IconGeneral
BrandHuawei
ModelQuidway S3900 Series
CategorySwitch
LanguageEnglish

Related product manuals