Huawei Quidway S3900 Series User Manual

Operation Manual -- VLAN
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 2 VLAN Configuration
Huawei Technologies Proprietary
2-2
II. Configuration procedure
Table 2-2 Basic VLAN interface configuration
Operation Command Description
Enter system view
system-view
—
Create a VLAN
interface and enter
VLAN interface
view
interface Vlan-interface
vlan-id
Required
The vlan-id argument ranges
from 1 to 4,094.
Specify the
description string
for the current
VLAN interface
description text
Optional
By default, the description
string of a VLAN interface is
the name of this VLAN
interface
Disable the VLAN
interface
shutdown
Optional
Enable the VLAN
Interface
undo shutdown
Optional
Note that the operation of enabling/disabling a VLAN interface does not influence the
enabling/disabling states of the Ethernet ports belonging to this VLAN.
By default, a VLAN interface is enabled. In this scenario, a VLAN interface’s status is
determined by the status of its Ethernet ports, that is, if all the Ethernet ports of the
VLAN interface are down, the VLAN interface is down (disabled); if one or more
Ethernet ports of the VLAN interface are up, the VLAN interface is up (enabled).
If a VLAN interface is disabled, its status is not determined by the status of its Ethernet
ports.
2.1.3 Displaying VLAN Configuration
After the configuration above, you can execute the display command in any view to
display the running status after the configuration, so as to verify the configuration.
Table 2-3 Display VLAN configuration
Operation Command Description
Display the VLAN
interface
information
display interface
Vlan-interface [ vlan-id ]
Display the VLAN
information
display vlan [ vlan-id [ to
vlan-id ] | all | dynamic |
static ]
You can execute the display
command in any view.

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English