Huawei Quidway S3900 Series User Manual

Operation Manual - QoS&QoS Profile
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 QoS Configuration
Huawei Technologies Proprietary
1-14
II. Configuration procedure
Table 1-6 Set to use the port priority
Operation Command Description
Enter system view
system-view
—
Enter Ethernet port
view
interface interface-type
interface-number
—
Set the port priority
priority priority-level
Optional
By default, the port
priority is 0
Table 1-7 Set to use the packet priority
Operation Command Description
Enter system view
system-view
—
Enter Ethernet port
view
interface interface-type
interface-number
—
Set the switch to use
the packet priority
priority trust
Through this
configuration, the switch
uses the packet priority
instead of the port priority
III. Configuration example
z Set to use the port priority and specify the priority of Ethernet1/0/1 to 7.
Configuration procedure:
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface gigabitEthernet1/0/1
[Quidway-GigabitEthernet1/0/1] undo priority-trust cos
[Quidway-GigabitEthernet1/0/1] priority 7
z Set the switch to use the 802.1p priority carried in the packet on Ethernet1/0/1.
Configuration procedure:
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface Ethernet1/0/1
[Quidway-Ethernet1/0/1] priority trust
1.5 Configuring Priority Remark
Refer to 1.1.5 Priority Remark for the introduction to priority remark.

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English