Huawei Quidway S3900 Series - Management Vlan Configuration; Configuring the Management Vlan

Operation Manual - Management VLAN
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 Management VLAN Configuration
Huawei Technologies Proprietary
1-2
1.2 Management VLAN Configuration
1.2.1 Prerequisites
Before configuring the management VLAN, make sure the VLAN operating as the
management VLAN exists. If VLAN 1 (the default VLAN) is the management VLAN, just
go ahead.
1.2.2 Configuring the Management VLAN
Table 1-1 Configure the management VLAN
Operation Command Description
Enter system
view
system-view
-
Configure a
specified VLAN
to be the
management
VLAN
management-vlan vlan-id
Required
By default, VLAN 1 operates as
the management VLAN.
Add a default
VLAN
ip route-static 0.0.0.0
0.0.0.0 { Null
null-interface-number |
next-hop } [ preference
preference-value ] [ reject |
blackhole ]
[ detect-group
detect-group-id ]
[ description text ]
Required
Create the
management
VLAN interface
and enter VLAN
interface view
interface vlan-interface
vlan-id
Required
Assign an IP
address to the
management
VLAN interface
ip address ip-address
mask [ sub ]
Required
By default, the management
VLAN interface has no IP
address.
Provide a
description string
for the
management
VLAN interface
description string
Optional
By default, the description string
of the management VLAN
interface is “Vlan-interface vlan-id
Interface”.