Huawei Quidway S3900 Series User Manual

Operation Manual - QoS&QoS Profile
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 QoS Configuration
Huawei Technologies Proprietary
1-18
1.7.2 Configuration Procedure
Table 1-11 Configure rate limit on ports
Operation Command Description
Enter system
view
system-view
—
Enter Ethernet
port view
interface interface-type
interface-number
—
Configure
port-based rate
limit
line-rate { inbound |
outbound } target-rate
Required
z target-rate: Total rate to limit
packet sending and receiving
on the port, in kbps. The
granularity of rate limit is 64
kbps. If the number you input is
in the range of N*64 to
(N+1)*64 (N is a natural
number), the switch will set the
value to (N+1)*64 kbps
automatically
z The rate range of 100M
Ethernet ports is from 64 to
99,968
z The rate range of Gigabit
Ethernet ports is in from 64 to
1,000,000
Display the
precedence of the
protocol packet
display
protocol-priority
Optional
You can execute the display
command in any view
1.7.3 Configuration Example
z Set rate limit in the outbound direction of Ethernet1/0/1 on the switch
z The limit rate is 1 Mps (1024 kbps)
Configuration procedure:
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface Ethernet1/0/1
[Quidway-Ethernet1/0/1] line-rate outbound 1024
1.8 Configuring TP
Refer to 1.1.8 TP for the introduction to TP.

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English