Huawei Quidway S3900 Series User Manual

Operation Manual - DHCP
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 2 DHCP Server Configuration
Huawei Technologies Proprietary
2-12
Operation Command Description
Configure DHCP
clients to be of a
specific NetBIOS
node type
netbios-type { b-node |
h-node | m-node | p-node }
Optional
By default, no NetBIOS node
type of the DHCP client is
specified and a DHCP client
uses an h-node
2.2.7 Customizing DHCP Service
With the evolution of DHCP, new options are constantly coming into being. You can
add the new options as the properties of DHCP servers by performing the following
configuration.
Table 2-8 Customize DHCP service
Operation Command Description
Enter system view
system-view
—
Create a DHCP
address pool and
enter DHCP
address pool view
dhcp server ip-pool
pool-name
Required
By default, no global DHCP
address pool is created
Configure
customized
options
option code { ascii
ascii-string | hex
hex-string&<1-10> |
ip-address
ip-address&<1-8> }
Required
By default, no customized
option is configured
2.2.8 Configuring Gateway Addresses for DHCP Clients
Gateways are necessary for DHCP clients to access servers/hosts outside the current
network segment. After you configure gateway addresses on a DHCP server, the
DHPC server provides the gateway addresses to DHCP clients as well while assigning
IP addresses to them.
You can configure gateway addresses for address pools on a DHCP server. Currently,
you can configure up to eight gateway addresses for a DHCP address pool.

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English