Operation Manual – Voice VLAN
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 Voice VLAN Configuration
Huawei Technologies Proprietary
1-6
1.2.3 Configuring a voice VLAN to operate in manual mode
Table 1-4 Configure a voice VLAN to operate in manual mode
Operation Command Description
Enter system view
system-view
—
Enter port view
interface interface-type
interface-number
Required
Enable the voice VLAN
function for the port
voice vlan enable
Required
By default, the
voice VLAN
function is disabled
on a port.
Set voice VLAN operation
mode to manual mode
undo voice vlan mode auto
Required
The default voice
VLAN operation
mode is automatic
mode.
Quit to system view
quit
—
Enter
VLAN
view
vlan vlan-id
Access
port
Add the
port to the
VLAN
port interface-list
Enter port
view
interface interface-type
interface-num
Add the
port to the
voice
VLAN
port trunk permit vlan
vlan-id
port hybrid vlan vlan-id
{ tagged | untagged }
Required
Add a
port in
manua
l mode
to the
voice
VLAN
Trunk
or
Hybrid
port
Configure
the voice
VLAN to
be the
default
VLAN of
the port
port trunk pvid vlan vlan-id
port hybrid pvid vlan
vlan-id
Optional
Refer to
Table 1-2
to determine
whether or not this
operation is
needed.
Quit to system view
quit
—
Set an OUI address to be one
that can be identified by the
voice VLAN
voice vlan mac-address
oui mask oui-mask
[ description text ]
Optional
If you do not set
the address, the
default OUI
address is used.