Operation Manual – Port Basic Configuration
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 Port Basic Configuration
Huawei Technologies Proprietary
1-6
Operation Command Remarks
Enter Ethernet port view
interface
interface-type
interface-number
—
Enable flow control on
the Ethernet port
flow-control
By default, flow control is not
enabled on the port.
1.2.4 Configuring Access Port Attribute
Table 1-6 Configure access port attribute
Operation Command Remarks
Enter system view
system-view
—
Enter Ethernet port view
interface interface-type
interface-number
—
Set the link type of the port
to access
port link-type access
Optional
By default, the link type
of a port is access.
Add the current access port
to a specified VLAN
port access vlan vlan-id
Optional
1.2.5 Configuring Hybrid Port Attribute
Table 1-7 Configure hybrid port attribute
Operation Command Remarks
Enter system view
system-view
—
Enter Ethernet port
view
interface interface-type
interface-number
—
Set the link type of the
port to hybrid
port link-type hybrid
Required
Set the default VLAN
ID for the hybrid port
port hybrid pvid vlan
vlan-id
Optional
If no default VLAN ID is set
for a hybrid port, VLAN 1
(system default VLAN) is
used as the default VLAN of
the port.