Huawei Quidway S3900 Series User Manual

Operation Manual – Login
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 3 Logging in through Telnet
Huawei Technologies Proprietary
3-1
Chapter 3 Logging in through Telnet
3.1 Introduction
You can manage and maintain a switch remotely by Telneting to the switch. To achieve
this, you need to configure both the switch and the Telnet terminal accordingly.
Table 3-1 Requirements for Telnet to a switch
Item Requirement
The management VLAN of the switch is created and the
route between the switch and the Telnet terminal is
available. (Refer to the Management VLAN Configuration
module for more.)
Switch
The authentication mode and other settings are
configured. Refer to
Table 3-2 and Table 3-3.
Telnet is running.
Telnet terminal
The IP address of the management VLAN of the switch is
available.
3.1.1 Common Configuration
Table 3-2 lists the common Telnet configuration.

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English