EasyManuals Logo

Huawei Quidway S3900 Series User Manual

Huawei Quidway S3900 Series
955 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #377 background imageLoading...
Page #377 background image
Operation Manual – Multicast Protocol
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 2 IGMP Snooping Configuration
Huawei Technologies Proprietary
2-8
Operation Command Description
Configure the query
response timer
igmp-snooping
max-response-time
seconds
Optional
By default, the query
response timeout time is
10 seconds.
Configure the aging timer
of the multicast member
port
igmp-snooping
host-aging-time
seconds
Optional
By default, the aging time
of multicast member ports
is 260 seconds
2.2.3 Enabling IGMP Fast Leave
Normally, when receiving an IGMP Leave message, IGMP Snooping does not
immediately remove the port from the multicast group, but sends an IGMP
group-specific query message. If no response is received in a given period, it then
removes the port from the multicast group.
If IGMP fast leave processing is enabled, when receiving an IGMP Leave message,
IGMP Snooping immediately removes the port from the multicast group. When a port
has only one user, enabling IGMP fast leave processing on the port can save
bandwidth.
Table 2-7 Enable the IGMP fast leave processing
Operation Command Description
Enter system view system-view
Enter Ethernet port view
interface interface-type
interface-number
Enable the fast leave from
the specific VLAN for a
port
igmp-snooping fast-leave
[ vlan vlan-list ]
Optional
By default, the fast leave
from the multicast group
for a port is disabled.
2.2.4 Configuring IGMP Snooping Filtering ACL
You can configure multicast filtering ACLs on the switch ports connected to user ends
so as to use the IGMP Snooping filter function to limit the multicast streams that the
users can access. With this function, you can treat different VoD users in different ways
by allowing them to access the multicast streams in different multicast groups.
In practice, when a user orders a multicast program, an IGMP report message is
generated. When the message arrives at the switch, the switch examines the multicast
filtering ACL configured on the access port to determine if the port can join the

Table of Contents

Other manuals for Huawei Quidway S3900 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei Quidway S3900 Series and is the answer not in the manual?

Huawei Quidway S3900 Series Specifications

General IconGeneral
BrandHuawei
ModelQuidway S3900 Series
CategorySwitch
LanguageEnglish

Related product manuals