Operation Manual – Voice VLAN
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 Voice VLAN Configuration
Huawei Technologies Proprietary
1-9
# Enable the voice VLAN function for the port and configure the port to operate in
automatic mode.
[Quidway-GigabitEthernet1/0/1] voice vlan enable
[Quidway-GigabitEthernet1/0/1] voice vlan mode auto
# Enable the voice VLAN function globally.
[Quidway-GigabitEthernet1/0/1] quit
[Quidway] voice vlan 2 enable
1.4.2 Voice VLAN Configuration Example (Manual Mode)
I. Network requirements
z Create VLAN 3 and configure it as a voice VLAN.
z Configure Ethernet1/0/1 port as a Trunk port for it to be added to/removed form the
Voice VLAN.
z Configure the OUI address to be 0011-2200-0000, with the description string
being “test”.
II. Configuration procedure
# Create VLAN 3.
<Quidway> system-view
[Quidway] vlan 3
[Quidway-vlan3] quit
# Configure Ethernet1/0/3 port to be a Trunk port and add it to VLAN 3.
[Quidway] interface Ethernet1/0/3
[Quidway-Ethernet1/0/3] port link-type trunk
[Quidway-Ethernet1/0/3] port trunk permit vlan 3
# Enable the voice VLAN function for the port and configure the port to operate in
manual mode.
[Quidway-Ethernet1/0/3] voice vlan enable
[Quidway-Ethernet1/0/3] undo voice vlan mode auto
[Quidway-Ethernet1/0/3] quit
# Specify an OUI address.
[Quidway] voice vlan mac-address 0011-2200-0000 mask ffff-ff00-0000
description test
# Enable the voice VLAN function globally.
[Quidway] voice vlan 3 enable
# Display voice VLAN-related configurations.
[Quidway] display voice vlan status
Voice Vlan status: ENABLE