Huawei Quidway S3900 Series - Mstp Configuration

Operation Manual – MSTP
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 MSTP Configuration
Huawei Technologies Proprietary
1-24
<Quidway> system-view
[Quidway] interface Ethernet1/0/1
[Quidway-Ethernet1/0/1] stp point-to-point force-true
1.2.14 MSTP Configuration
I. Configuration procedure
Table 1-19 Enable MSTP in system view
Operation Command Description
Enter system view
system-view
—
Enable MSTP
stp enable
Required
MSTP is disabled by
default.
Disable MSTP on
specified ports
stp interface interface-list
disable
Optional
By default, MSTP is
enabled on all ports after
you enable MSTP in system
view.
To enable a switch to
operate more flexibly, you
can disable MSTP on
specific ports. As
MSTP-disabled ports do not
participate in spanning tree
generation, this operation
saves CPU resources.
Table 1-20 Disable MSTP in Ethernet port view
Operation Command Description
Enter system view
system-view
—
Enable MSTP
stp enable
Required
MSTP is disabled by
default.
Enter Ethernet port
view
Interface interface-type
interface-number
—