Huawei Quidway S3900 Series User Manual

Operation Manual - DHCP
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 2 DHCP Server Configuration
Huawei Technologies Proprietary
2-20
Table 2-16 Configure DNS services for the DHCP server
Operation Command Description
Enter system view
system-view
—
interface interface-type
interface-number
dhcp server domain-name
domain-name
Configure
the current
interface
quit
Configure
a domain
name for
DHCP
clients
Configure
multiple
interfaces in
system view
dhcp server domain-name
domain-name { interface
interface-type
interface-number [ to
interface-type
interface-number ] | all }
Required
By default, no domain
name is configured for
DHCP clients
interface interface-type
interface-number
dhcp server dns-list
ip-address&<1-8>
Configure
the current
interface
quit
Configure
DNS
server
addresses
for DHCP
clients
Configure
multiple
interfaces in
system view
dhcp server dns-list
ip-address&<1-8> { interface
interface-type
interface-number [ to
interface-type
interface-number ] | all }
Required
By default, no DNS
server address is
configured.
2.3.6 Configuring NetBIOS Services for DHCP Clients
For Microsoft Windows-based DHCP clients that communicate through NetBIOS
protocol, the host name-to-IP address translation is carried out by WINS servers. So
you need to perform WINS-related configuration for most Windows-based hosts.
Currently, you can configure up to eight WINS addresses for a DHCP address pool.
Host name-to-IP address mappings are needed for DHCP clients communicating
through the NetBIOS protocol. According to the way to establish the mapping,
NetBIOS nodes fall into the following four categories:

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English