Huawei Quidway S3900 Series User Manual

Operation Manual – Port Security & Port Binding
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 Port Security Configuration
Huawei Technologies Proprietary
1-7
Note that:
1) The port-security port-mode autolearn command cannot be configured with the
following features at the same time:
z Static and black-hole MAC address
z Voice VLAN feature
z 802.1x feature
z port link aggregation
z configuration of mirroring reflect port
2) The port-security max-mac-count count-value command cannot be configured
with the mac-address max-mac-count count.
1.3 Displaying Port Security Configuration
After the above-mentioned configuration, you can use the display command in any
view to view the port-security related information, so as to verify configuration result.
Table 1-4 Display port security configuration
Operation Command Description
Display information about
port security configuration
display port-security
[ interface interface-list ]
Display the information
about Security MAC
address configuration
display mac-address security
[ interface interface-type
interface-number ] [ vlan vlan-id ]
[ count ]
The display
command can be
executed in any
view.
1.4 Port Security Configuration Example
I. Network requirements
z Enable port security on port Ethernet1/0/1 of switch A
z Set the maximum number of the MAC addresses accommodated by the port to 80
z Set the port security mode to autolearn
z Add the MAC address 0001-0002-0003 of PC1 as Security MAC address to VLAN
1

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English