Huawei Quidway S3900 Series User Manual

Operation Manual – Link Aggregation
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 Link Aggregation Configuration
Huawei Technologies Proprietary
1-11
Operation Command Description
Enter Ethernet
port view
interface
interface-type
interface-number
—
Enable LACP on
the port
lacp enable
Required
By default, LACP is disabled on a port.
Configure the port
priority
lacp port-priority
port-priority
Optional
By default, the port priority is 32,768.
1.3 Displaying and Maintaining Link Aggregation
Configuration
After the above configuration, execute the display command in any view to display the
running status after the link aggregation configuration and verify your configuration.
Execute the reset command in user view to clear LACP statistics on ports.
Table 1-4 Display and maintain link aggregation configuration
Operation Command Description
Display summary
information of all
aggregation groups
display link-aggregation
summary
Display detailed
information of a specific
aggregation group or all
aggregation groups
display link-aggregation
verbose [ agg-id ]
Display link aggregation
details of a specified port or
port range
display link-aggregation
interface interface-type
interface-number [ to
interface-type
interface-number ]
Display local device ID
display lacp system-id
You can execute
the display
command in any
view.
Clear LACP statistics about
a specified port or port
range
reset lacp statistics
[ interface interface-type
interface-number [ to
interface-type
interface-number ] ]
Execute the reset
command in user
view.

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English