Huawei Quidway S3900 Series - Displaying the Routing Table

Operation Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 2 Static Route Configuration
Huawei Technologies Proprietary
2-3
2.3 Displaying the Routing Table
After the above configuration, use the display command in any view to display and
verify the static route configuration.
Table 2-2 Display the routing table
Operation Command Description
Display routing table summary
display ip
routing-table
Display routing table details
display ip
routing-table
verbose
Display the detailed information
of a specific route
display ip
routing-table
ip-address [ mask ]
[ longer-match ]
[ verbose ]
Display the routes in a specified
address range
display ip
routing-table
ip-address1 mask1
ip-address2 mask2
[ verbose ]
Display the routes filtered through
a specified basic access control
list (ACL)
display ip
routing-table acl
acl-number
[ verbose ]
Display the routes filtered through
a specified IP prefix list
display ip
routing-table
ip-prefix
ip-prefix-name
[ verbose ]
Display the routes discovered by
a specified protocol
display ip
routing-table
protocol protocol
[ inactive | verbose ]
Display the tree-structured
routing table information
display ip
routing-table radix
Display the statistics of the
routing table
display ip
routing-table
statistics
You can execute the
display command in
any view.