EasyManuals Logo

Huawei Quidway S3900 Series User Manual

Huawei Quidway S3900 Series
955 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #592 background imageLoading...
Page #592 background image
Operation Manual - DHCP
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 2 DHCP Server Configuration
Huawei Technologies Proprietary
2-11
2.2.6 Configuring NetBIOS Services for the DHCP Server
For Microsoft Windows-based DHCP clients that communicate through NetBIOS
protocol, the host name-to-IP address translation is carried out by Windows internet
naming service (WINS) servers. So you need to perform WINS-related configuration
for most Windows-based hosts. Currently, you can configure up to eight WINS
addresses for a DHCP address pool.
Host name-to-IP address mappings are needed for DHCP clients communicating
through NetBIOS protocol. According to the way to establish the mapping, NetBIOS
nodes fall into the following four categories:
z B-node. Nodes of this type establish their mappings through broadcasting (The
character b stands for the word broadcast). The source node obtains the IP
address of the destination node by sending the broadcast packet containing the
host name of the destination node. After receiving the broadcast packet, the
destination node returns its IP address to the source node.
z P-node. Nodes of this type establish their mappings by sending unicast packets
to WINS servers. (The character p stands for peer-to-peer). The source node
sends the unicast packet to the WINS server. After receiving the unicast packet,
the WINS server returns the IP address corresponding to the destination node
name to the source node.
z M-node. Nodes of this type are p-nodes mixed with broadcasting features (The
character m stands for the word mixed), that is to say, this type of nodes obtain
mappings by sending broadcast packets first. If they fail to obtain mappings, they
send unicast packets to the WINS server to obtain mappings.
z H-node. Nodes of this type are b-nodes mixed with peer-to-peer features. (The
character h stands for the word hybrid), that is to say, this type of nodes obtain
mappings by sending unicast packets to WINS servers. If they fail to obtain
mappings, they send broadcast packets to obtain mappings.
Table 2-7 Configure NetBIOS services for the DHCP server
Operation Command Description
Enter system view
system-view
Create a DHCP
address pool and
enter DHCP
address pool view
dhcp server ip-pool
pool-name
Required
By default, no global DHCP
address pool is created
Configure WINS
server addresses
for DHCP clients
nbns-list ip-address&<1-8>
Required
By default, no WINS server
address is configured

Table of Contents

Other manuals for Huawei Quidway S3900 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei Quidway S3900 Series and is the answer not in the manual?

Huawei Quidway S3900 Series Specifications

General IconGeneral
BrandHuawei
ModelQuidway S3900 Series
CategorySwitch
LanguageEnglish

Related product manuals