Huawei Quidway S3900 Series User Manual

Operation Manual – Login
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 2 Logging in through the Console Port
Huawei Technologies Proprietary
2-6
2.4 Console Port Login Configuration with Authentication
Mode Being None
2.4.1 Configuration Procedure
Table 2-4 Console port login configuration with the authentication mode being none
Operation Command Description
Enter system view
system-view
—
Enter AUX user interface view user-interface aux 0 —
Configure not to authenticate
users
authentication-mode
none
Required
By default, users
logging in through
the Console port are
not authenticated.
Set the baud
rate
speed speed-value
Optional
The default baud
rate of an AUX port
(also the Console
port) is 9,600 bps.
Set the check
mode
parity { even | none |
odd }
Optional
By default, the check
mode of a Console
port is set to none,
that is, no check bit.
Set the stop
bits
stopbits { 1 | 1.5 | 2 }
Optional
The stop bits of a
Console port is 1.
Configure the
Console port
Set the data
bits
databits { 7 | 8 }
Optional
The default data bits
of a Console port is
8.
Configure the command level
available to users logging into
the user interface
user privilege level level
Optional
By default,
commands of level 3
are available to
users logging into
the AUX user
interface.
Make terminal services
available
shell
Optional
By default, terminal
services are
available in all user
interfaces.

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English