Huawei Quidway S3900 Series - Page 47

Operation Manual – Login
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 2 Logging in through the Console Port
Huawei Technologies Proprietary
2-7
Operation Command Description
Set the maximum number of
lines the screen can contain
screen-length
screen-length
Optional
By default, the
screen can contain
up to 24 lines.
You can use the
screen-length 0
command to disable
the function to
display information
in pages.
Set the history command buffer
size
history-command
max-size value
Optional
The default history
command buffer size
is 10. That is, a
history command
buffer can store up
to 10 commands by
default.
Set the timeout time for the user
interface
idle-timeout minutes
[ seconds ]
Optional
The default timeout
time of a user
interface is 10
minutes.
With the timeout
time being 10
minutes, the
connection to a user
interface is
terminated if no
operation is
performed in the
user interface within
10 minutes.
You can use the
idle-timeout 0
command to disable
the timeout function.
Note that the command level available to users logging into a switch depends on both
the authentication-mode none command and the user privilege level level
command, as listed in the following table.