Operation Manual – IRF Fabric
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 IRF Fabric Configuration
Huawei Technologies Proprietary
1-12
# Configure the unit ID as 2.
<Quidway> system-view
[Quidway] change unit-id 1 to 2
# Configure the unit name as unit 2.
[Quidway] set unit 1 name unit2
# Configure the fabric name as hello.
[Quidway] sysname hello
# Configure the authentication mode as simple password and the password as
welcome.
[hello] irf-fabric authentication-mode simple welcome
Configurations on Switch C and Switch D are similar with the above configurations.
To Next Page
Loading...
