Operation Manual -- VLAN
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 2 VLAN Configuration
Huawei Technologies Proprietary
2-7
2.3.4 Protocol-Based VLAN Configuration Example
I. Standard-template-protocol-based VLAN configuration example
1) Network requirements
z Create VLAN 5 and configure it to be a protocol-based VLAN, with the
protocol-index being 1 and the protocol being IP.
z Associate Ethernet1/0/5 port with the protocol-based VLAN to enable IP packets
received by this port to be tagged with the tag of VLAN 5 and be transmitted in
VLAN 5.
2) Configuration procedure
# Create VLAN 5 and enter its view.
<Quidway> system-view
[Quidway] vlan 5
[Quidway-vlan5]
# Configure the protocol-index to be 1, and the associated protocol to be IP.
[Quidway-vlan5] protocol-vlan 1 ip
# Enter Ethernet1/0/5 port view.
[Quidway-vlan5] interface Ethernet 1/0/5
# Configure the port to be a hybrid port.
[Quidway-Ethernet1/0/5] port link-type hybrid
# Add the port to VLAN 5 and add VLAN 5 to the untagged VLAN list of the port.
[Quidway-Ethernet1/0/5] port hybrid vlan 5 untagged
# Associate the port with protocol-index 1.
[Quidway-Ethernet1/0/5] port hybrid protocol-vlan vlan 5 1
To Next Page
Loading...
Need help?
General