Huawei Quidway S3900 Series User Manual

Operation Manual – Overview
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 3 Product Overview
Huawei Technologies Proprietary
3-3
Part Features
4 VLAN
z IEEE 802.1Q-compliant VLAN
z Port-based VLAN
z Protocol-based VLAN
5 IP Address and
Performance
Configuration
z Configuring an IP address for a switch
z Configuring the TCP attributes for a switch
6 Management
VLAN
z Management VLAN configuration
z Management VLAN interface configuration
7 Voice VLAN z Voice VLAN
8 GVRP z GARP VLAN registration protocol (GVRP)
9 Port Basic
Configuration
z Three port states supported: Access, Trunk, and Hybrid
z Setting broadcast storm suppression globally
z Loopback detection supported
z Cable test
10 Link
Aggregation
z Link aggregation control protocol (LACP)
11 Port Isolation z Port isolation group
12 Port
Security&Port
Binding
z Multiple security modes
z MAC address-to-port binding
13 DLDP z Device link detection protocol (DLDP)
14 MAC Address
Table
z Manually configuring dynamic, static, and black hole MAC
addresses
z Configuring the aging time for MAC addresses
z MAC address learning limit
15 Auto Detect
z Auto detect
z Auto detect applications in static routing, VRRP, and VLAN
interface backup
16 MSTP
z STP/RSTP/MSTP
z QinQ BPDU tunnel
z Huawei-3Com-proprietary MSTP path cost standard
17 Routing
Protocols.
z Static route
z Routing information protocol (RIP) v1/v2
z Open shortest path first (OSPF) (S3900-EI series switches
only)
z Routing policy
18 Multicast
z Internet group management protocol snooping (IGMP
Snooping)
z Internet group management protocol (IGMP) (S3900-EI
series switches only)
z Protocol-independent multicast-dense mode (PIM-DM)
(S3900-EI series switches only)
z Protocol-independent multicast-sparse mode (PIM-SM)
(S3900-EI series switches only)

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English