Huawei Quidway S3900 Series User Manual

Operation Manual – MSTP
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 MSTP Configuration
Huawei Technologies Proprietary
1-29
Operation Command Description
Configure the path cost
for specified ports
stp interface interface-list
[ instance instance-id ]
cost cost
Required
A MSTP-enabled switch
can calculate path costs for
all its ports automatically.
Table 1-25 Configure the path cost for a port in Ethernet port view
Operation Command Description
Enter system view
system-view
—
Enter Ethernet port
view
interface interface-type
interface-number
—
Configure the path cost
for the port
stp [ instance instance-id ]
cost cost
Required
A MSTP-enabled switch
can calculate path costs for
all its ports automatically.
Changing the path cost of a port may change the role of the port and put it in state
transition. Executing the stp cost command with the instance-id argument being 0 sets
the path cost on the CIST for the port.
III. Configuration example (A)
# Configure the path cost of Ethernet1/0/1 port in spanning tree instance 1 to be 2,000.
z Configure in system view.
<Quidway> system-view
[Quidway] stp interface ethernet1/0/1 instance 1 cost 2000
z Configure in Ethernet port view.
<Quidway> system-view
[Quidway] interface ethernet1/0/1
[Quidway-Ethernet1/0/1] stp instance 1 cost 2000
IV. Configuration example (B)
# Change the path cost of Ethernet1/0/1 port in spanning tree instance 1 to the default
one calculated with the IEEE 802.1D-1998 standard.
z Configure in system view.
<Quidway> system-view
[Quidway] undo stp interface ethernet1/0/1 instance 1 cost
[Quidway] stp pathcost-standard dot1d-1998
z Configure in Ethernet port view.
<Quidway> system-view
[Quidway] interface ethernet1/0/1

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English