Operation Manual – MSTP
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 MSTP Configuration
Huawei Technologies Proprietary
1-38
1.6.2 Digest Snooping Configuration
Configure the digest snooping feature on a switch to enable it to interwork with other
switches that adopt proprietary protocols to calculate configuration digests in the same
MST region through MSTIs.
I. Prerequisites
The switch to be configured is connected to a partner's switch that adopts a proprietary
spanning tree protocol. The MSTP network operates normally.
II. Configuration procedure
Table 1-36 Configure the digest snooping feature
Operation Command Description
Enter system view
system-view
—
Enter Ethernet port
view
interface interface-type
interface-number
—
Enable the digest
snooping feature
stp
config-digest-snooping
Required
The digest snooping feature
is disabled on the port by
default.
Return to system view
Quit
—
Enable the digest
snooping feature
globally
stp
config-digest-snooping
Required
The digest snooping feature
is disabled globally by
default.
Verify the above
configuration
display
current-configuration
You can execute this
command in any view.