Huawei Quidway S3900 Series User Manual

Operation Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 3 RIP Configuration
Huawei Technologies Proprietary
3-9
V. Setting RIP preference
Table 3-9 Set RIP preference
Operation Command Description
Enter system view
system-view
—
Enter RIP view
rip
—
Set the RIP preference
preference value
Optional
The default RIP
preference is 100.
VI. Enabling RIP traffic sharing
Table 3-10 Enable RIP traffic sharing
Operation Command Description
Enter system view
system-view
—
Enter RIP view
rip
—
Enable traffic sharing
traffic-share-across-interface
Optional
VII. Configuring RIP to import routes from another protocol
Table 3-11 Configure RIP to import routes from another protocol
Operation Command Description
Enter system view
system-view
—
Enter RIP view
rip
—
Set the default cost for
RIP to import routes
from other protocols
default cost value
Optional
When you use the
import-route
command without
specifying the cost of
imported routes, the
default cost you set
here will be used.
Configure RIP to
import routes from
another protocol
import-route protocol [ cost
value | route-policy
route-policy-name ]*
Optional

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English