Operation Manual – Multicast Protocol
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 2 IGMP Snooping Configuration
Huawei Technologies Proprietary
2-18
z Use the display igmp-snooping group command to check if the multicast groups
are expected ones.
z If the multicast group set up by IGMP Snooping is not correct, contact your
technical support personnel.
z Continue with solution 3) if the second step does not work.
If it is not the reason, the possible reason may be:
3) Multicast forwarding tables set up by IGMP Snooping is wrong.
z Use the display mac-address vlan command to check whether the MAC
multicast forwarding table set up in the vlan-id VLAN view is consistent with the
one set up by IGMP Snooping.
z If they are not consistent, contact your technical support personnel.