Huawei Quidway S3900 Series User Manual

Operation Manual – Multicast Protocol
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 7 PIM Configuration
Huawei Technologies Proprietary
7-15
Operation Command Description
Configure candidate
BSRs
c-bsr
interface-type
interface-number
hash-mask-len
[ priority ]
Optional
By default, candidate BSRs are
not set for the switch and the
value of priority is 0.
Configure candidate RPs
c-rp interface-type
interface-number
[ group-policy
acl-number |
priority priority ]*
Optional
z You can configure to filter the
IP addresses of some
multicast groups in ACL.
z By default, candidate RPs
are not set for the switch and
the value of priority is 0.
Configure static RPs
static-rp
rp-address
[ acl-number ]
Optional
z You can configure to filter the
IP addresses of some
multicast groups in ACL.
z By default, static RPs are not
set for the switch.
Limit the range of valid
BSRs
bsr-policy
acl-number
Optional
z You can configure to filter the
IP addresses of some
multicast groups in ACL.
z By default, the range of valid
BSRs is not set for the
switch.
Limit the range of valid
C-RPs
crp-policy
acl-number
Optional
z You can configure to filter the
IP addresses of some
multicast groups in ACL.
z By default, the range of valid
C-RPs is not set for the
switch.

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English