Huawei Quidway S3900 Series User Manual

Operation Manual – 802.1x
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 802.1x Configuration
Huawei Technologies Proprietary
1-15
Operation Command Description
In system view:
dot1x max-user
user-number [ interface
interface-list ]
Configure the
maximum number
of concurrent
on-line users for
specified ports
In port view:
dot1x max-user
user-number
Optional
By default, up to 256
concurrent on-line users are
allowed on each port.
Configure the
maximum retry
times to send
request packets
dot1x retry max-retry-value
Optional
By default, the maximum retry
times to send a request
packet is 2. That is, the
authenticator system sends a
request packet to a supplicant
system for up to two times by
default.
Configure 802.1x
timers
dot1x timer
{ handshake-period
handshake-period-value |
quiet-period
quiet-period-value |
tx-period tx-period-value |
supp-timeout
supp-timeout-value |
server-timeout
server-timeout-value |
ver-period
ver-period-value }
Optional
The default values of 802.1x
timers are as follows:
z handshake-period-value:
15 seconds
z quiet-period-value: 60
seconds
z tx-period-value: 30
seconds
z supp-timeout-value: 30
seconds
z server-timeout-value: 100
seconds
z ver-period-value: 30
seconds
Trigger the
quiet-period timer
dot1x quiet-period
Optional
By default, a quiet-period
timer is disabled.
 Note:
z As for the dot1x max-user command, if you execute it in system view without
specifying the interface-list argument, the command applies to all ports. You can
also use this command in port view. In this case, this command applies to the
current port only and the interface-list argument is not needed.
z As for the configuration of 802.1x timers, the default values are recommended.

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English