Huawei Quidway S3900 Series - Page 511

Operation Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 AAA & RADIUS & HWTACACS
Configuration
Huawei Technologies Proprietary
1-30
Operation Command Description
Set the units of
measure for
data flows sent
to RADIUS
servers
data-flow-format data { byte |
giga-byte | kilo-byte |
mega-byte } packet
{ giga-packet | kilo-packet |
mega- packet | one-packet }
Optional
By default, in a RADIIUS
scheme, the unit of measure
for data is byte and that for
packets is one-packet.
RADIUS scheme view
nas-ip ip-address
Set the source
IP address
used by the
switch to send
RADIUS
packets
System view
radius nas-ip ip-address
Optional
By default, no source IP
address is specified; and the IP
address of the outbound
interface is used as the source
IP address.