Huawei Quidway S3900 Series User Manual

Operation Manual - DHCP
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 2 DHCP Server Configuration
Huawei Technologies Proprietary
2-15
Configuration task Remarks Section
Configure to bind
IP address
statically to
DHCP clients
Configure to
assign IP
addresses of
interface DHCP
address pool to
DHCP clients
Configure to
assign IP
addresses
dynamically
One among
these two
options is
required.
These two
options can
be configured
at the same
time.
2.3.4 “Configuring to
Assign IP Addresses of
DHCP Address Pools to
DHCP Clients”
Configure DNS service for the
DHCP server
Optional
2.3.5 “Configuring DNS
Services for the DHCP
Server”
Configure NetBIOS service for the
DHCP server
Optional
2.3.6 “Configuring
NetBIOS Services for
DHCP Clients”
Customize DHCP service Optional
2.3.7 “Customizing
DHCP Service”
Configure the connection between
the DHCP interface address pool
and the BIMS server
Optional
2.3.8 “Configure
Connection Between the
DHCP Interface Address
Pool and the BIMS Server”
2.3.2 Enabling DHCP
You need to enable DHCP before performing DHCP configurations. DHCP-related
configurations are valid only when DHCP is enabled.
Table 2-12 Enable DHCP
Operation Command Description
Enter system view
system-view
—
Enable DHCP
dhcp enable
Required
By default, DHCP is enabled

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English